Fusion is an entry level product from Autodesk. It is not as "fancy" as Autodesk inventor or SolidWorks, but I promise you that it can do 95% of the most common modeling tasks that most people will need. The price point is perfect for company users so that nobody will complain about expensive software. The software lacks good simulation capabilities, but that is to be expected for the price point.I have convinced management at my company to cancel 3 license keys for a more expensive modeling tool and simultaneously get 5 other user licenses for Fusion 360 at a fraction of the cost. We haven't missed a beat, and now I have more people available to create the needed drawings for execution tasks and 3D models for FEA and CFD.

Fusion 360 is inexpensive and handles 99% of the modeling needs that I have. The user interface is simple and intuitive. It strikes a good balance between having what you really need easily available with minimal hunting as opposed to having a congested user interface with thousands of options that are all one click away if you can manage to find the right "button".

One previous con with Fusion 360 was not directly related with the software but rather with the updating experience. During the first update, my IT team struggled to the point I almost decided to cancel the subscription and switch to OnShape which is cloud based and doesn't require my IT team to do anything. To be fair to AutoDesk, I have never had problems updating the hobbyist version of 360 on my personal laptop. The last couple of updates were more easily managed by my IT team, so there might have been a learning curve for them. So this doesn't seem to be an issue anymore thankfully.Another previous con was related to software capabilities. At first, I really despised the lack of ability to incorporate weld symbols into the drawings. However, Fusion 360 added that capability and now I can provide detailed drawings with weld symbols without having to copy-paste pictures of weld symbols into the drawing. This too has been resolved and so it is no longer an issue either.The only remaining con I have with Fusion 360 is the simulation capabilities. I had moderate hopes that the FEA tool would be useful, but it seems to be linked to a limited amount of credits and limited types of simulation such as liner-FEA. It really seems like AutoDesk is just trying to "check the box" to say that Fusion 360 can perform FEA. Don't waste your time with the Simulation tools in Fusion 360. Find another tool for that such as SimScale, Abaqus, Ansys, etc.

Overall a great experience, I mainly use it for product renders and design mock-ups. I've participated at the Michelin Design challenge and was able to innovate with the help of Fusion 360 as student.

The user interface was much more easy to use as a beginner and over the 2 years as an experienced user. Fusion 360 has multiple avenues from modelling to rendering to CAM/3D printing simulation which is very helpful in not wasting time exporting it to 3D printing software and then modify the design.

The software seemed to not do a good job with respect to importing files of solidworks format and converting it over cloud. The speed of upload and download of files is quite slow and cloud rendering feature can be made more responsive/interactive.

Parametric design. Clean interface. Decent rendering.

Bugs bugs bugs. Performance issues, regardless of the computer being used. Drawings are resource heavy. Changing events in the design tree often lead to major errors. Features randomly stop working. I have been using Fusion since 2016 and I can say pretty confidently that it continues to get more and more clunky.

I use the free version for personal use. Probably the best ”free” 3D software. Easy to use and interactive.

There is more to wish for the scetch tool. Blue on blue isn’t very visual and the snap fuctions feels fiddly. Scetching is way faster with the tools in for example Autocad R14 (long time ago, but that is what I am used to). I don’t like cloud based software since I often work while traveling.

3D modeling in Fusion 360 is a wonderful experience as I have designed products ranging from medical equipment to automotive technology to household tools and even industrial machine parts with ease.

First of all, you can never lose any file on Fusion 360. Even if you fail to save and your device shuts down, you can always get a recovered version on restarting Fusion on that device. Secondly, Fusion 360 is so light as compared to its other competitions as it really doesn't consume much of your OSD/ROM. Finally and obviously, you can easily get access to your design files from anywhere and at anytime you want it as Fusion saves them on the cloud.

Of course, Fusion 360 is cloud based and may consume internet data while it is running in "working online" mode. And in offline mode, user experience might not be smooth.

We're an Robotics based Ed-tech startup with the help of which we're creating robotics and other technical solutions for our customers. Therefore, a lot of R&D we do, we create each and every single part or component of a robot in the software. We're rendering the models, creating scenarios and simulating in real time in order to get the right design values and material selection for our product

1. I've been using this software to create the kinematic links and simultaneously creating the mechanism joints resulting in getting the desired motion, I want to show in a simulation 2. With the help of it's feature recognition tool, it's easy to design each and every single part and can align them in a single tree 3. Easy to access shortcuts helps an advanced user to design components more quickly

As this software a cloud-based, it requires high-speed internet to stay logged in while designing and rendering the whole model. Constant updating is one thing that I'm concerned cause it popped out in the middle of your work

As a hobbyist and educators Fusion 360 provides free licence for it.

Ease of use. Free 3 Year license for students and educators Fast and easy Model Analysis. Cloud-based Model storage.

As it is comparatively new software still contains some glitches and crashes or sometimes requires a restarting the computer to get it working.

Overall, my experience with Fusion 360 has been lovely, loved drawing on it, loved simulating on it as well as the other typical CAD features you would expect!

Where to begin! Fusion 360 is an immersive experience when drawing, it is easy to draw the part with multiple commands that help make your drawing easier to come to life. You can also take your drawing directly to do a simulation, which is pretty accurate and easy to use as well, and it could be done on a cloud! Thus, you don't need much computing power to run your simulation!

Hard to say what this software lacked. For my time-to-time simple usage of the product, I found it very fulfilling from the aspects that you need as a mechanical engineer, I was able to share my drawing with my team in a simple manner, and I was able to save and go back to previous work without any issue.

As I said previously the team had the idea that we were going to need additional software to design and produce all our prototypes (considering the special needs of our CNC machines), but we ended up adopting Fusion completely for the whole design process.

It's the most affordable CAD/CAM alternative for our team (and I know I'm not alone on that). Fusion has actually surprised us for good with its capabilities, since at first glance we thought we were going to need additional software to design and mechanize prototypes, but we ended up adopting Fusion completely even for using it directly with our dated CNC machines.

Learning the software from zero it's a bit hard, specially coming from other "traditional" softwares like Pro-Engineer and Solidworks, but it totally pays off in the end. But I would totally like to see more customizable keyboard shortcuts and interface parts.

Very useful if you are creating prototypes specially when doing research and development.

The way you can integrate this CAD software with Additive manufacturing and creating the perfect prototype before going on mass production, easy to manipulate and Cloud drive becomes very useful when going between workshops.

It is very limited on creating features on CAD if you compare it with top design CAD software.

Fusion 360 is a fantastic project management application that caters to 3D printing customers online. It's an excellent modeling tool that's required for a successful 3D printable design. Fusion 360 offers a unique module for 3d printing in addition to its solid features. It connects to Autodesk's MeshMixer, which is another 3D printing program. The extension *.stl is required for 3D printable files. Fusion 360, on the other hand, handles this file extension with ease. A 3D printable file with specific qualities is urgently required. If there are any flaws in the design, they must be fixed before 3d printing. This is done through MeshMixer, which can be found inside Fusion 360.

- Fusion 360 is an excellent choice for technical design projects. You can work on the same file with your teammate or customer because it can function on the cloud with numerous users. - Fusion 360's assembly features are another fantastic feature. Fusion 360 allowed you to quickly and easily create assembly pieces. - And, maybe most importantly, it has a parametric design. This provides a designer a lot of power. After you've completed your project, you can adjust some design parameters. As a result, after discussing the final design with your customer, making last-minute modifications on Fusion 360 is a breeze. - Fusion 360 is available for free and includes all functionality. It's an excellent software option for a startup with a limited budget.

- Fusion 360, despite having excellent cloud software, becomes extremely sluggish when using slow internet connections. - Fusion 360 consumes a significant amount of RAM on your smartphone. On your device, it's best to set the RAM setting as high as possible. - Fusion 360's sculpting and retopology capabilities lag behind those of competitor products.

Fusion 360 has made it really easy to prototype designs, as it is much easier to pick up than a lot of other CAD software, like Inventor and Solidworks, and significantly cheaper.

First of all, it's really easy to use, and it can run on lower-specced machines that can't run other CAD solutions. I also love how it's cross-platform. I switched from Windows to macOS about a year ago, and still have to use Windows for certain software, but I can start a project on my Mac and easily open the same project on a Windows device. And everything is saved to the cloud so it's super easy to keep track of your files and switch between devices. Fusion also has a version history, so you can very easily rollback to older versions of a file, or even just rollback certain modifications to a file. Another benefit of the cloud storage is that I can just send an email with a link to my colleagues and they also have access to the same file that I'm working on, so no more worrying if other people have the correct or most up-to-date version of the file.

Sometimes Fusion takes a while to launch. Another issue I have is with the pricing of cloud renderings. If you are a student you have unlimited 'cloud credits', but for a hobbyist or business, you have to buy a pack of at least 100 credits for $100, and every time a cloud rendering or simulation is done, you have to pay one of those credits. It doesn't seem like much, but it does add up, and I would personally refrain from using the cloud rendering and simulation services.

It's a great piece of software for people who want to work on projects that require CAD rendering. It's fairly intuitive to work with and with tutorials someone can easily learn the fundamentals and be working on their project in a few hours.

Free for non-commercial use. Powerful, intuitive tools. Great for hobbyists, 3d printing, non-commercial projects. Huge body of information and tutorials. cloud based storage

Has a learning curve, like any 3D rendering or engineering software. Can run into performance hitches occasionally. File management on cloud is occasionally confusing.

I came from using it in high school to using it for hobbies and business designs. Best CAD for MAC OS

Since the change in the free plan. Many changes have been made that taken away features from free users. However the software is great but the changes in licensing has had me move away from it however I still recommend it.

Fusion360 is simple and great specially to get started or simple projects since the software allows the user to undergo the whole process from your 3D model to the simulation of the manufacturing process. A highly recommended product.

3D CAD is simple, controls are user friendly, very straight forward menu with ease of accessibility to the various 3D modelling tools/controls, work can be saved on the cloud meaning you can access your work at any place. The best part about this software is the manufacturing add-in, you can undergo the whole process of bringing your product to life, from the 3D model, to manufacturing it with the various options fusion 360 has to offer (lathe, milling, water cutting, etc). 3D printing function is also great, the software gives you the G-code (necessary for 3D printers to print) for you to import it into your printer dedicated software and voila!

The software is simple which can also be a con if you are interested in more complex geometries and mechanical studies of parts you should look for more specialized software like SolidWorks or Inventor.

fusion 360 was very easy for me to learn and its been a great experience using it so far. majorly, I use fusion 360 in designing products for additive manufacturing as it is easy to modify my design and share with the team from anywhere since its cloud based.

The fact that it is cloud based made it easy for you to work as a team on the same project. fusion 360 offer great features especially in the 3D sketch as compared to its competitors, and the regular updates improves the UI and UX. as light as it is, its fully packaged with features to enable users make even complex designs, render and as well simulate it.

fusion 360 crashes too much especially when trying to upload designs made in offline mode to cloud, and it can be really frustrating.

I was able to teach myself 3D CAD, and solve all my basic needs around 3D printing projects, like little accessories, cases or replacement parts for any broken item around the house.

Fusion 360 is an excellent piece of software for hobbyists and makers, especially considering that it's completely free, even for small businesses. The learning curve is very steep and if you are willing you can create complex designs all by yourself in very short time.

You need a basic understanding of the working principles of a 3D CAD software and you must be willing to try and learn. It's not as easy as working with primitives like in Tinkercad, but it's of course aimed at another group of people. What should also be noted, is that Fusion 360 is cloud based, so all your designs are stored there, which is convenient, when you access them from different locations but can also be a disadvantage if Autodesk will one day decide to pull the plug on the servers. If you are using an older Mac, be aware that they will soon drop support for macOS below version 10.13.

Once installed I love this program, kids are designing and printing from day one uninhibited by the quirkiness of other freeware.

This program along with a couple of online tutorials get my students creating solutions to human problems in the first couple of days of class. From there they begin to see the connection between structure, function, and asthetics.

Initial installation is frustratingly clunky and overly involved. In order for my students to get an educational license I have to provide each of them with a letter on school letterhead. If we are at a school, using school based google domain emails perhaps we can get this program going a little easier!

The absolute most mind numbing software and customer service on the planet. Do yourself a favor and just spend the money for mastercam or esprit. I cant stress enough how annoying this software is to use everyday. They implement too many weekly changes to have any sort of consistency. You constantly need to adapt. Some features feel like a beta version.

Its cheap but that doesn't mean its worth your time.

you get what you pay for, which is a cloud based software that barley works, can't render more then 300 holes without lagging out, and annoying pop-ups that if you hover over anything, will block everything you need to see.

The feature set of this tool was really great. I regularly design 3d models to print and this has played a key part in my learning. And it was really easy to use. I have used other cad tools in the past so I do have experience but I do think it would easy for anyone to pickup.

- Lack of simulation tools for 3d printed parts - Hard to do text or sketch on curved surfaces

It is a very intuitive software that is cheaper than most of the alternatives and performs on par if not better than its competitors. It has a great cloud facility which makes collaborating possible.

it is not possible to replace parts within an assembly which makes it a hassle to reassemble it. Sometimes, the tools that we organize according to our liking defaults to their original places, which then requires us to manually rearrange the tools again.

I enjoy using Fusion 360 for design, the interface and modern design make it pleasant to use.

The interface is very up to date and easy to get used to. It does not feel like most cad software programs, it is a sort of happy medium between the old interface of products like SolidWorks and AutoCAD and newer simpler products that are made for more lightweight editing. It is easy to manipulate and create objects, and I find myself often working faster in Fusion 360 than when I use SolidWorks.

It feels like some of the more intense and powerful tools are missing (like structural analysis and finite element modeling), which is likely more a result of the kind of product they are trying to release than slacking on the part of the developers.

I use Fusion for rapid prototyping of medical devices, furniture, and art. I'm satisfied with the program and like that it is both Cloud Based and has offline capabilities.

Fusion 360 is pretty easy to use and the drop-downs are intuitive (assuming you're not new to modeling). I like how easy it is to export models to the CNC or 3D Printer.

I also do video game design and Fusion has NOT made that easy to do at all. It looks like I'll aso be using 3DSMax for awhile until they Fusion becomes a little more friendly to the VR world. It is super easy to accidentally delete previous work if you don't save before closing Fusion (Windows update is the bane of productivity and cause of a lot of lost work).

I was a user of another software from the same company probably 14 years ago when I was taking a product design degree, and had to stop using it when I transitioned to Mac. It's great now to be able to use it again without having to create virtual machines! It's still the same great product, with a lot of new features

It's great to have a CAD/CAM software that runs natively on MacOS system. It has been my favourite tool to design, model, assemble and render projects, and all on the same tool. No exports needed or external render engines - it's all I need!

It can be a bit heavy when processing big fies, and performance-wise it could be improved on a MacOs systems.