With Teamcenter software, more than one people can work on same data with same time and Teamcenter is easily control this complex process. In the multi location companies this is a huge problem and if the people don't know about the latest version of 2D or 3D, It may cause wrong updates on the data. Teamcenter solved this potential errors very easily also very user-friendly.

Sometimes the interface works very slowly and it is very annoying but it happens very rarely. Also, sometimes software closes suddenly.

Overall it does what it is designed to do. There is plenty of room for improvements with ease of access, speed, and usability. Teamcenter can be the top of its class with a few improvements in these areas.

Easy to get approvals and set a workflow. Once you are used to it, it enables you to do things much quicker and remotely if necessary. Easy access to the documents of your entire organization.

This software can be difficult to use for people who are not tech savvy. Our administrator is bogged down with explaining this software to users, and there are plenty of ways people can go wrong with this. The software also has some bugs that slow it down and make accessing documents slow. Search features are slow and buggy.

i've been working with it for 5 years growing in size inside my company. A lot of processes have been improved with Teamcenter

This tool is quite powerfull, workflows, warnings, subcriptions... A good tool to collaborative enviroments.

i would like it to be more stable. There are a lot of incidences related with stability.

I am using this product for almost 4 years in automotive industry. It is very helpful to design a new part, checking package area, measurements for environmental components. You can section the parts and so on.

It has a lot of featuers that you can use in automotive industry. Snapshot feature is my favourite because when you opened a lot of components for a vehicle, snap is saving your work and after sometime you can re-opened all your package.

Sometimes the measurements took a lot of time and software collapses.

I personally recommend this application if you want to analyze complex 3d data models

This program is very useful while complex 3D data like passenger cars. It shows quite fast even if you fully open a model with exterior, interior and powertain components.

If you start this program newly, its very hard to get used it. The educational modules im the system is not sufficient enough

It’s quite useful 3D viewer software with an easy interface.

I like feature that allows me to section by every dimensions. Then those sections can be shift easily to deep dive on product 3D.

When I want to measure something in a complex package, it’s difficult to select the exact point/edge I want. I prefer a short list to open and ask me on which product I want to select my point.

I use Teamcenter everyday that I store 3D, 2D models and engineering documents and check easily.

It's a huge environment that you can keep 3D model data, BOM, change management etc. You can track the history for the revisions of all files stored in it.

Having connection problems couple of times. Thin client sites are not compatible with all browsers.

Teamcenter is a main part of our working days in automotive industrial.

Our company have been using Teamcenter to view 3D and 2D CAD models. It is easy to use. Most of tools like transformation, section or movement works very well.

When you click to big data to open, it may causes an error and you need to close the program and re-open.

Worked on creo integrated Teamcenter. And it is completely best package.

Workflow initiation are done in single click and ECR and ECN process and it is easily integrated with creo are best part.

Nothing to dislike. It is an wonderful PLM software.

I use Teamcenter everyday to convert my design data to product data. It is so useful for big companies because you should work together simultaneously.

TC should improve itself because it is not user friendly.

It is usefull service for us. I was supplier viewer before and it is easy to learn if you are supplier viewer. But after i complere my designer viewer training, i found terminology and steps are complicated. There are too many things to learn at tce.

I use it every day at work and it is one of my best service. It is user friendly and capable to work with catia v5. Measurement, color, alignment, jack tool etc. is very useful. Especially jack tool is really important for our ergonomic studies. It is commonly used program at ford global and makes our assesment easier. There are many tools which I do not know how to use, but I really want to learn like motion tool. It s a plus to know tce very well if you are at automative industry.

Sometimes i can not measure an edge or point. That is related with catia designs i believe but it makes my work harder. I was supplier viewer and now i took my designer viewer access and complete my training. Training of tce is not very helpful if you are beginner. Also release and frozen, item, item revisions etc. Seems to me difficult to learn now due to complicated names and steps.

User interface is easy to uderstand. Tracking CAD data method is user friendly. You can easily reach older revisions of CAD data. 2D section assessments are easy with VisMockUp. Toolbar customisation works perfect. Easy to import and export CAD data.

Taking measurements accuracy is low sometimes. You cannot always select the exact location where you want to take measurement from.

Minimum price maximum performance gain on my low end system use.

It gives realy high performance even you have low end system. It is able to contain lots of data in same time.

3D section tool is not easy to use for curve section sometimes it is hard to find a place to create a section on complex 3D model.

It enables me to review 2D/3D data easily and quickly navigate through as I evaluate.

It has a wide variety of integrated tools such as dimensional measurments, 3D comparison an even motional analyses.

Depending on how much data one wants to review, it might use a lot of PC memory.

Simple and effective, strongly recommend

Easy to use, very user friendly interface. It is very useful to see the older revisions of products

It gets slow when you have a lot of files on home tab

Teamcenter drives our business. Allowing for good control of product revisions and workflows for approvals, Teamcenter is overall a very good PLM system. While it's immense features can make it complex, especially for new users, it is fairly intuitive and there is decent documentation available. The flexibility and ability for integration of 3rd party systems only strengthens the software package.

It can be complex for new users and tribal knowledge is one of the best ways to learn.

User friendly Well organized working Windows Vismockup tool is really enough for 3D checks

Sometimes had a problem about connection

Structure manager is very usefull for comecity management

Vis Mockup connection is slow, some server issues are common

enable to export a data with different formats (like jt, step)

it takes too much time to open a large data

Many ways to grab and track and analyze information

clunky and not intuitive. I would have a hard time finding the information I needed without referencing the manual.

A robust program for cad modelling but difficult to use for the ones who are not expert

It is a powerful and robust program for cad modelling

I am not a daily frequent user, i use 3-4 times in a week, so it is not very easy program for less frequent users. You need to take training and support to be able to a good user

It is useful and effective. Only a little complex to learn.

It a powerful and versatile tool that has endless option to customize. It is easy to control the life-cycle of a product.

It is quite hard to understand and use some features. Not easy for beginners and requires some training time.

It is good to use same platform to see and check the data easiliy and faster.

it is taking time to open new data. Sometimes system is giving error and fizing is taking so much time.

Overall, it’s a practical software for data storage & collaborative work environment.

I think it’s a useful software, which enables the collaborative work environment. It’s also a good data storage option.

It can be complicated for new beginners.