However, for someone who is not researching in CFD but using it as a design tool, Fluent is way more user friendly at the cost of research level customizations to tweak problem setups.

Excellent and advanced physics modeling capabilities, industry leading accuracy and features. Great customer service from their capable technical support team.

Perhaps, the option of not being able to convert the simulation file into a GUI is something that is still missing in Fluent.

It responded very well to the parametric study and I did not find it difficult to integrate with other software.

Most of the time, the answers are actually more questions, which rather point on to 1 or 2 simple things or, a new question alltogether, making the whole process of going to the forum, quite useless.

The overall usefulness of this software is way more higher than its disadvantages,  So, it is highly recommended.

If there is only one or two persons who answer the questions on probably a 1000 + strong or more community on the forum, you definitely need more people who could man the ansys forum.

Our organisation has derived several benefits with Ansys, and it integrates well with most of the modelling softwares and PLM platforms.

Ansys has been the market leader in this domain for quite sometime now, and it has consistently been rated the best.

Keeping pace with the changes and new functionalities is a bit of a learning curve. The rendering of 3D heat maps and stress diagrams is a bit choppy with certain older generation GPUs.

It also has support for distributed computing architecture which has been very beneficial in meshing and processing complex one dimensional CAE problems.

The best in the market for simulating air fluxes and water flows. It requires a good understanding of the physics behind but at the end the results are very well presented and reliable.

Simultaneous use of multiple versions (for compliancy with older projects) can be difficult during installation and configuration.

It's difficult to compute a well refined mesh on low end laptops due to processor and ram limitations.

Also had the privilage to get a 850£ subscription to the training page, which was such a bad design. Why don't you hire a better UI designer?), and finding data on the same was very challenging.

ANSYS Fluent is the greatest software for Computational Fluid Dynamics simulations. It comes with a number of add-ons that are incredibly useful for product research and development.

Thanks to its ease of use it allows a fast progress of the works, which allowed me to publish several scientific-numerical papers.

Superb I learned lot as software learning is better then book learning.

The software is difficult to use , and the acadimec version have a lot of problems.

Recently, i heard of ansys adoption of Virtual Reality which i think will be perfect for real time simulation of multiphase models.

It is extremely beginner friendly. Furthermore there is a help icon below each and every button which allows and opens up a browser which provides an in-depth analysis of the same.

The price is good and there is a good deal of physical model functionality from low to hypersonic. Significant V&V has been done.

I use it in all my CFD simulation and I have been very satisfied with it. I definitely recommend researcher to use it if available through their institutions.

Best for simpler and small scale FEM analysis... can also work for Solidworks imported mesh. Thats a plus and helpful for me.

Ansys is the best... for particular and more material specific analysis ( like i designed my in composite and tested the equallent model on that) its not that accurate.

A bit slow if number of meshed element are too large, a bit difficult to use for beginners.

In my opinion ANSYS Fluent is the best software for CFD simulations. It has several add-ons that are extremely helpful for design and product development.

Also someone with low or no knowledge of engineering will find it confusing and difficult to use fluent. Furthermore, the user interface is not too enticing for new beginners.

Ansys can simulate a huge as well as micro system in a quite stable way. Variety of files can be saved and get by Ansys software which includes excel, csv, pdf etc.

There are minimum requirements to install and run Ansys generally but at times, even those minimum requirements seem to be incapable of a ensuring a smooth run.

The long list of materials impressed me. Secondly, the simplified mesh was very easy to construct on ANSYS.

The plotting/visualization interface GUI is not as intuitive as setting up the problem and solving is.

AutoCAD is very easy and friendly in use, there is very easy command in AutoCAD which I love the most.

There is a problem of not having all the fonts available when downloading the program and the need to download other fonts separately in order to open some layouts, especially for Arabic fonts.

Its most important positive feature is ease of use and speed of learning by memorizing and understanding shortcuts.

I enjoy drawing in 2D and 3D and I especially enjoy creating building plans and this software is excellent for these purposes.

The software keys getting better and easier to use with multiple ways to use the software (online, desktop, mobile). The price can be prohibitive for those who only have occasional usage like myself.

I experienced program crash on my computer sometimes and it leads data&time loss for user.

Not a free version for small business or discounted price. Always auto-save problem and lost projects.

The biggest disadvantage of AutoCAD is that it comes with a lot of problems, which is to be expected from a tool that can do so much. It seems reasonable to me.

The ease of use of AutoCAD was the best part of the software, when I came in as a new user, it was very easy to get going and learn.

I love that there are shortcuts that you can utilize to be faster over time. I love that you can change layer line weights and customize for branding your documents.

What I like most about AutoCAD software is the ease of use and easy integration of other software packages to create exceptional drawings from preliminary to final fabrication drawings.

Autocad is a great app in my opinion, I can’t think of another app that is way better than autocad. I would highly recommend this app and I believe it is worth the money.

Great product for the cost and usability. It's super easy to learn and teach to new users.

AutoCAD is a solid software, with a friendly interface and with some practice is easy to use. Helps a lot with drafting processes from scratch, and you can use it in any level of the design process.

AutoCAD is hands down the best drafting software you can buy. They are obviously proud of it, but with good reason.

AutoCad is the best CAD on the market. Priced high but worth it.

When you just start learning how to use the software, you might seem a little lost. The controls might be a bit confusing.

Bad news for new users, AutoCAD and AutoCAD LT 2019 are only available by subscription unlimited licenses are no longer available.

This program is an essential partner in all the reconstruction of the earth. He is very excellent, noble and the greatest assistant to any engineer in particular.

My overall experience with AutoCAD has been wonderful, it a very helpful tool and provides a lot of features than helps on designing and reviewing drawings.

The keyboard commands are straight forward making 2D draughting easy no matter how complex the curves. It also integrates seamlessly with other industry programs.

There are so many different features to this software that it is sometimes confusing because of how much it can do.

Can produce good quality drawings fast. Nice crisp line weights that you can adjust to help read better.

The line style selection can be confusing as the line style chosen may not reflect properly when exported. The cursor snapping options can be confusing/ bothersome sometimes.

AutoCAD is a very powerful software for drawing, designing and landscaping etc and gives you and a clear picture on how to proceed with your project on ground.

The online support is awesome and it has such a big community to help you draw or do whatever you need.

Your faith in the ability of construction workers and technicians to apply this is boosted by the clarity of the engineering standards that are included on it.

The ability to create models and drafting extremely quickly and share with other users is fantastic.

Unable to zoom in and out properly. It's hard to command sometimes.

This program is still the best simplistic modeling software with the most advanced tools. Highly recommend to use for most architects/engineers as long as you have time to learn the UI.

I love all the easy commands that it provides, its a lot easier to draw things on cad than to draw them by hand for sure. The customer service team is amazing.

Maping scaling and macro recording function is more useful. They build the software more user friendly and more effectively.

It will difficult to run in the poor computer.

The worst feature of this software is the susbscription that you need to pay to use It. There is not available the option to only pay one time.

It is very hard to have even the least amount of dislike for anything this product has offered over the years.

What I like the most about this software is its ease and simplicity to understand and work, for a beginner it is a very good tool to learn.

Excellent for design of our new products. Integrates with our manufacturing software.

I am happy that most of my clients choose this program and not other 3D modeling software, which makes the collaboration super easy.

Loved being able to create spaces from scratch and being able to capture everything I wanted to be seen in a real and precise way. I love the visuals and the quality.

I find the admin portal is very straightforward which is helpful as an admin. Their customer support is top notch and makes it extremely easy to resolve complex issues.

It requires a certain level of knowledge to use, but it is still excellent. Its price is a little high compared to its competitors.

Excellent, we have accomplished several projects including patent applications with the fantastic software.

It is an excellent and useful tool for our company. Highly recommended, must choose if you are in search of great drawing tool.

I used this software during the free trial period for few times, and I think it this free trial was the most beautiful thing I like.

The overall experience with the software was quite satisfied and i am happy with the product.

I love the user friendliness of autocad. Even if you don’t know how to do something on it, it’s easy to figure out how to do what you want.

Easy interface, robust functionality, and a responsive support team.

Very good safety in storage and transmission. Ease of use after good training You can draw and remember commands greatly after interruption of work on it for periods.

US Dollar

Ansys Fluent unlocks new potentials for CFD analysis.  A fluid simulation software with fast pre-processing and faster solve times to help you be the fastest to break into the market. Fluent’s industry leading features enable limitless innovation, while never making a compromise on accura

LongDescription

Data Capture and Transfer

Data Import/Export

File Transfer

Configurable Workflow

Data Visualization

Customizable Templates

Reporting/Analytics

Summary Reports

Workflow Configuration

Task Management

Business Process Automation

Email/Help Desk

FAQs/Forum

Knowledge Base

Phone Support

Chat

Self-Employed

2-10

11-50

51-200

201-500

501-1000

1000+

Ansys Fluent

In Person

Live Online

Webinars

Documentation

Videos

AutoCAD is a 2D and 3D design and drafting platform for architects, engineers, construction professionals, field technicians and contractors, which supports 2D drafting, drawing and annotation tools, alongside 3D modeling and visualization technology. With native iOS and Android mobile apps, AutoCAD also gives users the flexibility to view, create, edit and share drawings on the go, via any smartphone or tablet.
<br>
<H2>What is AutoCAD?</H2>
<br>

<p> AutoCAD is a computer aided design application that allows users to create 2D and 3D drawings. </p> 
<br>

<H2>How do I use AutoCAD?</H2>
<br>
<p> Users can utilize toolsets to create models, drawings, schedules, and more. Users are able to create models of solids, mesh objects, and surfaces. </p> 
<br>

<H2>Who uses AutoCAD?</H2>
<br>
<p> Architects, engineers, and construction professionals </p> 
<br>

<H2>Does AutoCAD have an app?</H2>
<br>
<p>AutoCAD has an app for iOS, Android, and Windows 10 mobile devices. </p> 
<br>




File Management

Collaboration Tools

Geographic Maps

Offline Access

Annotations

For Manufacturers

For Architects

2D Drawing

Design Management

Drafting

Search/Filter

CAD Tools

Component Library

Secure Data Storage

Project Management

3D Modeling

Sketching and Annotation Tools

Third-Party Integrations

Floor Plans & Maps

Document Management

Drag & Drop

For AEC Industry

Rendering

Project Workflow

Document Storage

Access Controls/Permissions

Design Templates

Content Library

Landscape Design

Bills of Material

Mobile Access

Reusable Designs

Change Management

Rules-Based Workflow

Scheduling

Compliance Management

Workflow Management

Real-Time Updates

Parts Management

Project Templates

Electrical

Mechanical

Planning Tools

Product Data Management

Document Generation

Inventory Management

Customizable Fields

Inventory Tracking

Manufacturing Design Data

3D Design & Modeling

Purchase options include flexible subscription terms to fit the user's needs. Contact Autodesk directly for detailed pricing information.

Ansys Fluent vs AutoCAD

User Ratings & Reviews

Pricing

Product Demo & Screenshots

Advisor Recommendations & User Awards

Additional Info

Support and Training

Popular Comparisons