All Metrix Reviews
1-19 of 19 Reviews
Sort by
Robert
Verified reviewer
Printing, 51-200 employees
Used weekly for less than 12 months
OVERALL RATING:
5
EASE OF USE
3
VALUE FOR MONEY
3
CUSTOMER SUPPORT
3
FUNCTIONALITY
5
Reviewed October 2020
Metrix Review
I really like it... it helps save a ton of time and calculating.
PROSGreat for Calculating sheets needed and planning Job Layouts for Lithography.
CONSBig learning curve, but once you see the workflow you kinda get it.
Henry
Printing, 201-500 employees
Used weekly for less than 2 years
OVERALL RATING:
4
EASE OF USE
2
VALUE FOR MONEY
3
CUSTOMER SUPPORT
3
FUNCTIONALITY
3
Reviewed October 2020
Integrated Metrix
EFI has owned Metrix for years and has been slow to develop solutions for its MIS integrated version. My experience is that much of this is due to the fact that EFI has moved its software development overseas. The developers rarely get it right the first, second or third time.
PROSIt does a very good job of dealing with ganged jobs. Metrix will read in the estimated hours and material and the associated cost and then creates an optimized plan. When committed back to the MIS software it will update the plan and associated estimated hours and material based on the Metrix layouts. In addition, it will distribute cost collected for time and material based on distribution on the percent of the layout the jobs use.
CONSWhat is the best was related to jobs created from estimates. What it does worst is try to provide optimized plans for estimates as it relates to Pace’s MIS cross part optimization. It does a terrible job of communicating special colors through the XML.
Reason for choosing Metrix
We chose the MIS, ePace first. Our expectations were that since they were both owned by the same company, EFI, we would receive better integration than we have experienced
Josh
Printing, 201-500 employees
Used daily for more than 2 years
OVERALL RATING:
3
EASE OF USE
3
VALUE FOR MONEY
3
CUSTOMER SUPPORT
2
FUNCTIONALITY
2
Reviewed October 2020
Metrix....
Metrix software was the best thing out there for quite a few years but recently it is becoming a struggle to use. I believe that once EFI took over the software, it changed!
PROSLots of options for estimating, planning and prepress.
CONSSoftware upgrades seem to always have issues that take awhile to correct. EFI support is really hit and miss if they can fix an issue. I get a lot of "Future update" answers to the issues we have. My team has not been happy with Metrix over the last few "upgrades".
Madhusudan
Computer Software, 51-200 employees
Used daily for less than 2 years
OVERALL RATING:
5
EASE OF USE
5
VALUE FOR MONEY
5
CUSTOMER SUPPORT
5
FUNCTIONALITY
5
Reviewed February 2023
Changed how we conducted estimates
The programme is inflexible and clumsy in my opinion. When you make lots inactive when there are numerous lots listed on a task and you want part of the lots to be off the layout, the software crashes. Dotted lines for scores and perfs, as well as non-traditional shapes, cannot be depicted. An excel spreadsheet would allow me to depict pocket folders and die-cut forms more efficiently. Metrix has changed my layouts after I've configured it to print sheetwise if I need to rearrange layouts, in my experience. If you aren't careful, there is too much to be on the lookout for that might or might not change and could snag you.
PROSIt allows for the completion of specific sorts of estimations and is very time-efficient. Estimates are more thorough and precise.It works seamlessly with XMF. Layouts are easily imported, and they can be changed immediately if necessary.
CONSOn occasion, the graphics are not arranged to make the greatest use of the available space. unable to handle varied imposition.
Jim
Printing, 51-200 employees
Used daily for more than 2 years
OVERALL RATING:
4
EASE OF USE
3
VALUE FOR MONEY
4
CUSTOMER SUPPORT
3
FUNCTIONALITY
5
Reviewed October 2020
The good, the bad, the ugly
We use this daily to create impositions. Some features have reduced functionality after an upgrade, but are eventually addressed. The software is usually a MacOS version behind, which doesnt seem to bother our end users.
PROSIt does the functions that we are looking for (impositions mostly) quickly and efficiently.
CONSEach upgrade seems to break our workflow and is painful to get what we consider common sense addressed. Support isnt always helpful and core changes made to the software arent always in the release notes. We have open cases with EFI to address these issues and have moved past them with rollback and skipping versions to meet our end user needs.
Reason for choosing Metrix
The imposition portion of the software was superior to any other product we used previously.
thomas
Printing, 51-200 employees
Used daily for less than 2 years
OVERALL RATING:
4
EASE OF USE
3
FUNCTIONALITY
4
Reviewed October 2020
Metrix software - A work in progress
the software is ok, it is similar enough to other impositions. It has great potential, but our company hasn't had it and pace long enough to gain those automated job benifits.
PROSI like the connectivity to XMF. The idea of the software is very palatable, our company has had issues in getting it implemented as we do a wide variety of work. When integration is increased and people are taught more on the software it should be a main stapple of our prepress and give us a great deal of automated work done.
CONSVery dependent on the estimator. Changing jobs can be simple or extremely difficult to manage with our metrix/pace system. I believe some of our issues are training, also we just got word of an XMF upgrade that will help with some reported metrix issues.
Wanda
Printing, 51-200 employees
Used daily for more than 2 years
OVERALL RATING:
3
EASE OF USE
3
VALUE FOR MONEY
3
CUSTOMER SUPPORT
3
FUNCTIONALITY
2
Reviewed October 2020
EFI
It is ok, just need to make the AR module easier to use.
PROSEasy to move through the program, good that is internet based. Easy to pull the standard reports.
CONSSince update it is difficult to do AR balances always have to remove the lines that invoice is paid and is zero, that takes a lot of extra time. AR statement in excel no long can use formulas if need to change anything,. Posting invoices have to also make changes again taking longer to post.
Jim
Printing, 11-50 employees
Used daily for more than 2 years
OVERALL RATING:
3
EASE OF USE
5
VALUE FOR MONEY
5
CUSTOMER SUPPORT
5
FUNCTIONALITY
5
Reviewed October 2020
Metrix review
Transformed the way we did estimates
PROSIt is a great time saver, and makes doing certain types of estimates possible. Estimates are more complete and accurate
CONSInterface can be a little wonky from time to time
Reason for choosing Metrix
The integration into estimating is tremendous and a game changer
Paul
Printing, 51-200 employees
Used daily for more than 2 years
OVERALL RATING:
4
EASE OF USE
4
VALUE FOR MONEY
5
FUNCTIONALITY
4
Reviewed October 2020
EFI is great
So far completely satisfied with this product
PROSThe ease of arranging pages for multiple up and spacing
CONSThe display is a bit low res unless you are zoomed in.
Reason for choosing Metrix
Gave us the best advantage of color control and ease of use
Bruce
Printing, 51-200 employees
Used daily for less than 2 years
OVERALL RATING:
3
EASE OF USE
2
FUNCTIONALITY
3
Reviewed October 2020
Metrix to XMF
It integrates well with XMF. Layouts come in smoothly and if you have to adjust layouts you can do it on the fly.
CONSDoesn't do well with variable imposition.
Katalina
Information Technology and Services, 10,000+ employees
Used daily for more than 2 years
OVERALL RATING:
5
EASE OF USE
5
VALUE FOR MONEY
5
CUSTOMER SUPPORT
5
FUNCTIONALITY
5
Reviewed July 2023
Edita con confianza tus imagenes
Uff me encanto este aplicativo, es muy facil de utilizar, su interfas es bastante intuitiva a pesar de que su interfas es algo robusta.
CONSsu gestor de busqueda podria mejorar un poco ya que es algo lento.
Gail
Printing, 51-200 employees
Used weekly for more than 2 years
OVERALL RATING:
2
EASE OF USE
2
CUSTOMER SUPPORT
2
FUNCTIONALITY
2
Reviewed October 2020
Metrix layout review
Some of the combination of product features are useful
CONSI find the software cumbersome and rigid. If multiple lots are listed on a job and you want some lots not to be on a layout, when you make the lots inactive, the software errors out. Non traditional shapes can't be represented, dotted lines for scores and perfs. I could do more with an excel spreadsheet to represent pocket folders and die cut shapes in less time. I've experienced Metrix changing my layouts once I've set it up to be Perfect to printing sheetwise if I have to reorder layouts. There's too much to have to watch out for that may or may not change that can catch you if you aren't diligent.
Reason for choosing Metrix
Metrix was implemented before I was hired on.
paul
Printing, 51-200 employees
Used daily for more than 2 years
OVERALL RATING:
4
EASE OF USE
4
CUSTOMER SUPPORT
2
FUNCTIONALITY
3
Reviewed October 2020
Metrix
Very easy to set up large brochure or books
CONSCan't fake anything In layouts and don't work great with e pace
Angelique
Printing, 51-200 employees
Used weekly for more than 2 years
OVERALL RATING:
3
EASE OF USE
3
VALUE FOR MONEY
3
CUSTOMER SUPPORT
3
FUNCTIONALITY
3
Reviewed October 2020
Pretty Good
good we will keep using it.
PROSthe ease of laying out multiple graphics is very smooth
CONSsometimes it does not lay the graphics out to best utilize the material size
Zivko
Printing, 501-1,000 employees
Used weekly for more than 2 years
OVERALL RATING:
5
EASE OF USE
5
VALUE FOR MONEY
5
CUSTOMER SUPPORT
3
FUNCTIONALITY
4
Reviewed October 2020
Easy
Very easy to handle, intuitiv, good preferences
CONSinstalation procedure and support for educational institutions (every 6 months registration)
Reasons for switching to Metrix
It was more intuitiv
Rastko
E-Learning, 11-50 employees
Used monthly for more than 2 years
OVERALL RATING:
3
EASE OF USE
5
CUSTOMER SUPPORT
5
FUNCTIONALITY
4
Reviewed November 2020
Metrix software review
I am satisfied with its functionality but not with its stability and set up experience.
PROSIt is very easy to use, and produce very fast impositions; possesses many additional features in its database.
CONSIt showed to be very unstable (student computers often lost connection to server; some projects became locked...); earlier versions where ; many obstacles when trying to upgrade to new version; very complicated new software verification system.
Anonymous
11-50 employees
OVERALL RATING:
4
EASE OF USE
4
FUNCTIONALITY
4
Reviewed June 2023
Good Print Layout Software that I'd used
My product packaging. It somehow boost my works.
PROSMetrix software helped me with my packaging designs and to boost my productivity!
CONSSometimes if you zoom it goes to low resolution display so it is hard sometimes to adjust with the design
Robert
Printing, 51-200 employees
Used monthly for less than 2 years
OVERALL RATING:
4
EASE OF USE
2
VALUE FOR MONEY
3
CUSTOMER SUPPORT
2
FUNCTIONALITY
3
Reviewed October 2020
Metrix
It makes it very easy to import and organize large projects with a lot of different parts and materials.
CONSIt's complicated to set up and maintain. It would be really nice if it integrated in with Monarch so that we didn't have to duplicate all our standards.
Kareem
Verified reviewer
Computer Software, 201-500 employees
Used weekly for less than 6 months
OVERALL RATING:
4
EASE OF USE
5
FUNCTIONALITY
4
Reviewed November 2022
Metrix Review
It was really great experience.
PROSMetrix is a really great software with enormous options for handling business planning.
CONSMetrix UI is cool but it can be modified for better in future updates.